Subscribe free
GoldSilverBitcoinGold/silver ratio

Retirement income: how much do you need to retire?

Start with the bills your savings need to cover, not somebody else’s account balance.

By Diversify Guy, editorial desk8 min read

This page carries no ads and no affiliate links. How we get paid

In this article 8 sections
  1. How much retirement income will cover the bills?
  2. Which income sources belong in the plan?
  3. How does the income gap translate into savings?
  4. What do the current retirement averages tell you?
  5. What changes if retirement starts before the benefits?
  6. Which assumptions need a second version?
  7. About this guide
  8. Sources and check dates

Key points

  • A useful starting calculation is annual spending plus taxes, minus income from outside the investment portfolio. The remainder is the amount savings need to supply.
  • A retirement account balance, a household’s annual income and one person’s Social Security benefit measure different things. None is a complete retirement plan.
  • A hypothetical $18,000 annual portfolio gap corresponds to $450,000 at a 4% initial withdrawal rate. That is arithmetic, not evidence that the withdrawals will last.
  • Start dates matter. Leaving work, starting Social Security and becoming eligible for Medicare need not happen together.

Two households with the same savings can need very different retirement incomes. A paid-off home, an ongoing mortgage, a pension or a second person sharing expenses changes the calculation. Comparing account balances without comparing the bills leaves out half the question.

The job is to turn resources into a spending plan: what arrives, when it arrives, what remains after deductions and what savings must provide. National averages can supply context. They cannot fill in those amounts for a particular household.

How much retirement income will cover the bills?

Begin with an annual cash requirement, not a percentage of a former salary. Write down recurring living costs, expected irregular expenses and a separate allowance for taxes. Then subtract income that is not being drawn from the investment portfolio.

The resulting portfolio gap is the annual cash amount to be supplied by savings. It is not automatically the same as taxable income. Selling an asset, receiving a pension and withdrawing from a retirement account can have different tax consequences. The IRS explains that pension and annuity payments may be fully or partly taxable, depending on the arrangement and after-tax investment in the contract. Social Security has its own tax calculation. IRS pension guidance and Social Security tax guidance explain those distinctions.

A worksheet can separate the problem into four lines:

LineWhat belongs hereWhat to check
Living costsHousing, food, health care, transport and other spendingInclude bills paid annually
TaxesAn estimate for the income sources and withdrawals being modeledDo not confuse withholding with final tax
Nonportfolio incomeSocial Security, pension payments and any continuing earningsRecord the start date and gross or net basis
Portfolio gapTotal cash requirement minus nonportfolio incomeIdentify which accounts will supply it

Use either gross income with taxes and deducted premiums included among expenses, or net income with those deductions removed from expenses. Mixing the two counts the same deduction twice.

The retirement budget guide develops the expense side. If the question is how current retirees compare, average retirement income explains what the public statistics actually include.

Which income sources belong in the plan?

Give each source a separate row rather than one combined income figure. Beside the amount, record its first payment date, whether the amount is before deductions, whether it changes over time and what happens if a household member dies. These are questions for the relevant benefit statement, plan document or contract, not assumptions to fill with a national average.

Social Security. SSA’s monthly snapshot reports average benefits by beneficiary category. A retired-worker benefit is one person’s benefit, not total household income or a promise for a new claimant. For a clearly hypothetical illustration, a $2,100 monthly benefit would annualize to $25,200 if unchanged for twelve months. These are selected inputs, not national averages or observed annual receipts. An individual’s benefit estimate is the relevant planning input.

Pensions and annuities. Record the actual payment option being quoted. A monthly payment and a lump-sum balance are not interchangeable entries. The IRS’s pension and annuity guidance also makes clear why a gross payment cannot simply be labeled spending money.

Investment accounts. Keep the account wrapper separate from the assets inside it. The Federal Reserve’s retirement-account category combines IRAs, Keogh accounts and certain employer plans, including 401(k), 403(b) and thrift savings accounts. It excludes the value of future Social Security and defined-benefit pension income. An account total does not measure all retirement resources. The Fed’s definitions are in Appendix A.

Continuing work. Keep earnings in a separate scenario if the budget depends on them continuing. In the Fed’s 2025 household well-being survey, some self-described retirees were still doing paid work. Retirement status did not mean earnings had stopped. The survey’s retirement section explains its definition.

How does the income gap translate into savings?

Consider a hypothetical household. These are selected planning inputs, not national averages, tax estimates or a suggested spending level:

Annual cash-flow itemAmount
Living costs, including irregular expenses$60,000
Assumed taxes$6,000
Total cash requirement$66,000
Assumed Social Security$36,000
Assumed pension$12,000
Amount to draw from savings$18,000

The calculation is $66,000 minus $48,000 of nonportfolio income, leaving $18,000. Here, living costs already include any health premiums; the income amounts are gross. The tax allowance is a placeholder that would need its own calculation.

Dividing that gap by an assumed initial withdrawal rate gives different starting asset amounts:

Hypothetical initial rateCalculationStarting assets
3%$18,000 divided by 0.03$600,000
4%$18,000 divided by 0.04$450,000
5%$18,000 divided by 0.05$360,000

These rows do not test sustainability. They contain no investment returns, sequence of returns, inflation, fees, lifespan or future spending changes. They show the sensitivity of a starting estimate to one assumption. A higher rate produces a smaller required starting balance by construction; that does not make it a better plan.

The retirement withdrawal strategy guide takes the next step: separating a starting ratio from an ongoing method for drawing on accounts. For projections that let assumptions change, the site’s retirement calculators are a next step, not a substitute for the underlying budget.

What do the current retirement averages tell you?

The dates and populations belong next to the numbers:

BenchmarkPublished figureWhat it measures
Census, 2025 income$59,680 median annual incomeHouseholds with a householder age 65 or older, not retirees only
BLS, 2025 expenditures$64,445 mean annual spendingConsumer units with a reference person age 65 or older, not individual retirees
Fed, 2025 retirement accounts$106,000 median holdingsFamilies that hold retirement accounts, not all families and not 401(k)s alone

Sources: Census Table 1, BLS annual expenditure series and Fed Table 3. The Census and Fed dollar figures are in 2025 dollars; the BLS figure is the reported current-dollar amount for 2025.

Do not subtract the Census median from the BLS mean to announce a typical retirement shortfall. The units, populations and statistics differ. A median is the midpoint of a distribution. A mean is the total divided by the number of observations, with survey weights where appropriate.

The 2025 SCF was released on October 9, 2026. The 2022 survey is not the latest. The Fed’s family is its primary economic unit, which can be one person or a financially interdependent group. Its age categories use a designated reference person’s age. The published account median excludes families with no such holdings.

We use the Fed’s published tables, not a new calculation from its public microdata. Those data contain five imputed records per family and require the survey’s weighting and imputation procedures. Treating the records as independent households would misstate the sample and uncertainty. For a genuinely 401(k)-specific comparison, see average 401(k) balance by age.

What changes if retirement starts before the benefits?

Put the dates on the same worksheet as the dollars. A gap before a pension or Social Security begins is a different problem from the gap after all planned payments have started.

For eligible workers, Social Security retirement benefits can begin as early as 62, with a reduction for starting before full retirement age. Full retirement age is 67 for people born in 1960 or later. SSA’s age table gives the birth-year rules. These ages do not establish when a person must leave employment.

Medicare’s usual initial enrollment period is organized around age 65, with separate rules for special circumstances. Medicare’s enrollment page explains the timing. Do not assume that leaving work or claiming Social Security resolves health coverage automatically.

The average retirement age guide distinguishes reported retirement ages from benefit entitlement ages. Neither is a deadline for a particular household.

Which assumptions need a second version?

A plan is easier to inspect when changes are explicit. Duplicate the worksheet and change one input at a time:

  • Higher costs: Add a stated amount to the annual budget, rather than assuming the original spending figure remains sufficient.
  • Later income: Move a benefit or pension start date and calculate the intervening gap separately.
  • Reduced earnings: Remove part-time pay from one version to show how much the budget depends on it.
  • Different household circumstances: Rebuild both expenses and income for the changed household instead of simply halving everything.
  • Investment uncertainty: Test spending against different return paths, not just a single average return.

In the worked example, another $6,000 of annual costs raises the portfolio gap to $24,000. At the same hypothetical 4% initial rate, the asset calculation rises from $450,000 to $600,000. Nothing about the investment assumption changed; the bills did.

That is the useful role of an income plan. It exposes which numbers the decision depends on. A national account balance cannot do that.

About this guide

This guide covers U.S. retirement data and general cash-flow planning. Tax references concern federal rules only, not state tax. The examples are hypothetical and are not personalized tax or investment advice. Data and source availability were checked on November 3, 2026.

Written by the Diversify Guy editorial desk. Diversify Guy is a pen name. It is the byline of our editorial team, not a single individual. We do not publish personal trading records or claim to be your adviser. We tell you where every figure came from so you can check it yourself. How we work and how we get paid.

Sources and check dates

All sources checked November 3, 2026.

About this byline

Diversify Guy is the pen name of our editorial desk, not a person. We do not claim a personal investment track record, we are not advisers, and every claim about a company comes from a source you can check. Who writes this

Spotted an error? Tell us. We fix pages in place and say what changed.

First published Nov 15, 2026

The Fine Print

Plain-English notes on your 401(k), IRA and Social Security.

By subscribing, you agree to get emails from Diversify Guy, including sponsored messages. Unsubscribe anytime. You also agree to our Terms of use, which include an arbitration agreement, and our Privacy policy.